Connect Smart Bro with a router

Here's how you can make your Smart Bro connect to a Router. You can use your Smart Bro using multiple computers like your laptop and PSPs. It is simple, all you need is a small idea about Internet connection.

Here are the Easy Steps:

1. connect the ethernet cable from the smartbro antenna to the WAN/Internet port of the router.
2. Connect ur PC to one of the Ethernet ports of the router
3. Make sure that ur PC is set to Dynamic IP (Obtain IP automatically)
4. On ur Internet browser, type 192.168.1.1, leave username blank and password admin.
5. On the router’s setup page, set the Internet connection type to Automatic Configuration (DHCP) or Obtain an IP Automatically.
6. Save the settings.
7. Check the Status Tab to check if the router was able to get the connection from SmartBro.
8. If Automatic Configuration (DHCP) didnt work, set the router to Static IP. Take note of the IP address, subnet mask, default gateway, DNS 1 and 2 of your PC when its connected directly to SmartBro, then put it on the corresponding fields.

That's all. Enjoy surfing!